|
|
|
Update: 1999/05/17
 Telepath Pro 56K Voice Modem For Windows 95/98 Ver.1.00.016 Download a file to a directory which you make on your hard drive. Double click the file to extract the files contained in the archive. To install the software in Windows 95: 1.When the system is started, the modem is detected. The wizard window appears. Click Next to continue. 2.A window displays asking for the diskette. Make sure that the correct path to where the driver was downloaded to is listed and click OK. 3.Another window may display saying it cannot find a file needed to load the drivers for the modem. Click Browse. Select the folder you have extracted, then press Enter. 4.Click Next. 5.Click Next, then the files are copied to the hard drive. The next part of the installation is to install the wave device drivers for the modem. Click Next to continue with the installation. 6.Click Browse. Select the folder you have extracted, then press Enter. Click Finish to copy the files and to finish the installation of the modem. To install the software in Windows 98: 1. When the system starts, the modem is detected. The wizard will search out drivers to load. Click Next to continue. 2. The wizard will automatically search the hard drive for the drivers but will give you the option to choose what other devices to check. Put a check in Specify a location. Click Next to continue. 3. Click Browse. Select the folder you have extracted, then press Enter. Click Next, the wizard searches for the driver. 4. The wizard has located the device driver. Click Next to continue with the installation. 5. The files are copied. 6. Windows has finished installing the software for the modem. Click Finish to continue. 7.The wizard goes back out and searches for the wave device drivers. Click Next to continue. 8.The wizard prompts the user for what to do. Make sure to select Search for the best driver for your device (Recommended) and click Next. 9.The wizard will automatically search the hard drive for the drivers but will give you the option to choose what other devices to check. Put a check in Specify a location. Click Next to continue. 10.Click Browse. Select the folder you have extracted, then press Enter. Click Next, the wizard searches for the driver. 11.The wave driver installation has completed. Click Finish to continue.
| |||||||||||||||||
Copyright © 1996-2001 Gateway Japan, Inc. All rights reserved.
Back to Japanese Home