 | Installation Guide |  |
|
| |
Update: 1999/08/30
Vibra16X
Target
To install the driver
Preparing for Installation
| |
System CD or System Restoration CD
The User's guide that came with your system
|
|
note
 | | You may have the floppy disk contained a driver. The driver in the floppy disk is the latest the driver. If you have same driver of the parts both Gateway System CD and the floppy disk, you must use the floppy disk. |
CAUTION
 | | NT Service Pack 4 must be installed prior to installing this drivers. |
- The sp3path.bat file is a fix for Windows NT 4.0 systems that have been updated to Sevice Pack 3. This file needs to be run before attempting to install this driver on any system that is loaded with Windows NT 4.0 and Service Pack 3.
- Right click on the PNPISA.INF file on the Windows NT 4.0 CD-ROM, in the following directory: \DRVLIB\PNPISA\X86 and select install.
- Restart computer when prompted.
- Log on your as administrator. The [New Hardware Found] appears.
- Select [Drivers from disk provided by hardware manufacturer], and click [OK]. The [Install from Disk] appears.
- Click [Browse]. Select the folder the Driver is contained, then press [Enter] key.[Select Device] appears.
- Select [Creative Soundblaster 16 Plug & Play] and click [OK]. The [Sound Blaster 16 Configuration] appears.
- Click [OK].
- Point to the following directry on the Windows NT 4.0 CD: \drvlib\audio\sbpnp\i386. The [Joystick Port Configuration] appears.
Click [OK]. The [System Settings Change] appears.
- Click [Yes]. The installation is completed.
CAUTION
|
|
Please see User's guide for your additional references. This Installation Guide is made for the initial hardware configuration systems we ship. some processes would be changed depending on your hardware configuration.
|
|
Operationg System
